Product Code: 2806T
Made in China to TQB Brands Pty Ltd specifications
Page 7
Visit us at www.tqbbrands.com.au
6.
SERVICE & REPAIR
Any jack found damaged in any way, or found to be worn or operates abnormally should
be removed from service until repaired by an authorised service agent. Owners and / or
operators should be aware that repair of this product may require specialised equipment
and knowledge. Only authorised parts, labels, decals shall be used on this equipment.
Annual inspection of the jack is recommended and can be made by an authorised repair
facility to ensure that your equipment is in optimum condition and that the equipment
has the correct decals and safety labels specified by the manufacturer.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
ACTION
Jack will not lift load
•
Release valve not tightly
closed
•
Load is too heavy
•
Ensure release valve it
tightly closed
•
Consider higher capacity
jack
Jack will lift, but not maintain
pressure
•
Release valve not tightly
closed
•
Hydraulic unit malfunction
•
Ensure release valve is
tightly closed.
•
Discontinue use and
contact service agent
Jack will not lower after
unloading
•
Reservoir overfilled
•
Linkages binding
•
Drain fluid to proper level
•
Clean and lubricate
moving parts
Poor lift performance
•
Fluid level low
•
Air trapped in system
•
Ensure proper fluid level
•
Purge air from hydraulic
system
•
With ram fully retracted,
remove oil filler plug to let
pressurised air escape.
Reinstall oil filler plug.
Will not lift to full extension
•
Fluid level low
•
Ensure proper fluid level
