02/21
Product Code: 1055T
Made in China to TQB Brands Pty Ltd Specifications
Page 6
Visit us at www.tqbbrands.com.au
5.
STORAGE
This TradeQuip wheel/tyre lifter should always be stored under cover in a dry location and on a level surface.
6.
MAINTENANCE
Replace or repair damaged parts. Use recommended TradeQuip genuine parts only. Non authorised parts may be
dangerous and will invalidate the warranty.
•
Always store the Lifter in a well-protected area where it will not be exposed to inclement weather, corrosive vapours,
abrasive dust, or any other harmful elements. The Lifter must be cleaned of water, snow, sand, mud, grit, oil, grease, or
other foreign matter before and after using.
•
Inspect the Lifter before each use. Do not use the Lifter if any component is cracked, broken, bent, or shows signs of
damage. Do not use the Lifter if it has loose or missing hardware or components or is modified in any way. Take corrective
action before using the Lifter again.
7.
SERVICE & REPAIR
Any wheel/tyre lifter found damaged in any way or found to be worn or operates abnormally should be removed from service
until repaired by an authorised service agent. Owners and / or operators should be aware that repair of this product may
require specialised equipment and knowledge. Only authorised parts, labels and decals shall be used on this equipment.
