71
Description
The zone command used to configure JBOD Zone Type. (JBOD needs to be reset for changes
to take effect).
Examples
EEB00 >zone 1
ful
Syntax
ful Buffer-ID(H) Buffer-Offset(H) Size In Bytes(D)
Parameters
Buffer-ID: ID of the Read/Write buffer from which the file will be uploaded.
Buffer-Offset: Starting buffer offset within the specified buffer ID from which the file
will be uploaded.
Size In Bytes: Size of the file, in bytes.
Description
The ful command uploads data to a file from the buffer offset within a specified Read/Write
buffer ID. This command uses XMODEM protocol for file transfer. The size of the uploaded
file is specified as a command line parameter. Due XMODEM protocol nature, the size of
uploaded data will be multiples of 128 bytes. Therefore, if the mentioned size is not
a multiple of 128 bytes, pad bytes will be added with undefined contents. Data beyond
the specified size must be ignored. To exit the ful command before starting the XMODEM
protocol, press Q or q.
Examples
EEB00 >ful 2 0 128
Upload File -
Please Use XModem Protocol to Receive File.
Use Q Or q to quit Download before starting XModem.
Transmitted 128Bytes
Buffer Upload Complete
sasaddr
Syntax
sasaddr
Parameters
None.
