36
Power Interface Board (PIB)
Removing the Power Interface Board (PIB):
Use the following steps to remove the Power Interface Board (PIB):
1.
Power down the system by disconnecting the power cables.
2.
Remove all the hot-swappable hard disk drive assemblies.
3.
Remove all components from the system.
4.
Flip the chassis and remove the securing screws.
5.
Remove the PIB from the HDD
backplane 3.
Installing the Power Interface Board (PIB):
Use the following steps to install the Power Interface Board (PIB):
1.
Connectl the PIB to the HDD backplane 3.
NOTE: PIB connectors are facing the inside of the chassis.
2. Secure the PIB to the HDD
backplane 3.
