TRADEDX JBOD76 User Manual Download Page 48

Page: 48 / 82

FAIL LIST

List JBOD failed devices.

Use command jbodstat to validate the displayed information.

SUB-ENCL.

Display JBOD sub-enclosure mode.

Use command subenclosure to validate the displayed

information.

JBOD ID

Display JBOD ID.

Use command jbodid to validate the displayed information.

FW VER.

Display JBOD firmware version.

Use command fwinfo to validate the displayed information.

FAIL LIST

Event

Description

FAN_FAIL

Read RPM through I2C failed.

FAN_SPEED_ABNORMAL

Fan speed abnormal.

TEMP_FAIL

Read temperature through I2C failed.

TEMP_WARNING

Temperature is higher than warning temperature.

TEMP_CRITICAL

Temperature is higher than critical temperature.

VOLTAGE_FAIL

Read voltage through I2C.

VOLTAGE_WARNING

Voltage is higher than warning voltage.

VOLTAGE_CRITICAL

Voltage is higher than critical voltage.

RTC_FAIL

Read RTC through I2C.

FW_FAIL

Firmware failed.

PS_FAIL

Read power supply information through I2C.

PS_AC_FAIL

Power supply AC abnormal.

DISK_FAULT

Disk failed.

DISK_TEMP_WARNING

Disk temperature is higher than warning temperature.

DISK_TEMP_CRITICAL

Disk temperature is higher than critical temperature.

Setting Page

In an Information page, press Set to enter the corresponding setting page—only
available for TIME&DATE, IP CONFIG, ZONE TYPE, SUB-ENCL. and JBOD ID.

Button Function

Summary of Contents for JBOD76



















































































Search results

Summary of Contents for JBOD76

Reviews:

Related manuals for JBOD76

Brands by name

Popular brands

TRADEDX JBOD76, User Manual

Search results

Summary of Contents for JBOD76

Reviews:

Related manuals for JBOD76

Brands by name

Popular brands