13
The pressure regulator has been factory set for the highest quality operating performance. The pressure regulator
adjusts the desired pressure range where the air compressor kicks in and out to keep the tank pressurized for the
best operating performance.
“Warning”
Please refer your compressor to a qualified compressor technician for adjustments to the
pressure switch. Incorrect settings can be dangerous and/or overload the motor, causing damage, the possibility of
fire and loss to property.
Selection and connection of air driven tools
To connect air tools to your air compressor:
1.
Make sure the compressor model you use has a sufficient volume in output for the air tool you plan to connect.
(Most air tools will have an air requirement stated in terms of a specific volume at a specific pressure.)
2.
The compressor should put out a higher volume than the tool requires.
—If you are connecting multiple tools that will be used simultaneously, then the combined volume of each tool should
be added together and compared to the compressor output value.
3.
Connect the tool, using a good quality air line with an adequate length to reach from the compressor to the point of
use.
Note
—Quick-connect couplers, are a good option for fast and sure connection of tools and air hoses.
Summary of Contents for MCFRC227
Page 3: ......
