L&G Tools and Machinery User Manual
12
10. ASSEMBLY AND ADJUSTMENT
Before using your drill be sure to read instruction manual
carefully. Prior to assembly and adjustment always unplug the
tool.
Screw the auxiliary handle on the right or left of the machine
depending on the working method. (see picture 2)
MOUNTING THE GRINDING TOOLS
•
Before working on the machine, ensure the mains plug is off.
•
Grinding and cutting discs become very hot while working, do not touch them until
they have cooled.
•
Clean the grinder spindle and all parts to be mounted.
•
For clamping and loosening the grinding tools lock the grinder spindle with the
spindle lock button.
•
Activate the spindle lock button only when the grinder spindle is at a standstill.
Otherwise, the machine may become damaged.
GRINDING / CUTTING DISC
•
Pay attention to the dimensions of the grinding tools.
The mounting hole diameter must fit the mounting
flange without play. Do not use reducers or
adaptors. When using diamond cutting discs, pay
attention that the direction of rotation arrow on the
diamond cutting disc and the direction of rotation of
the machine agree.
•
To fasten the grinding/cutting disc, screw on the clamping nut and tighten with the
two-pin spanner. (see picture 3)
•
After mounting the grinding tool and before switching on, check that the grinding
tool is correctly mounted and that it can turn freely. Make sure that the grinding tool
does not graze against the protection guard or other parts.
Observe correct mains voltage! The voltage of the power source must agree with the
voltage specified on the nameplate.
