Tractive TRATR2, User Manual

Page: 4 / 44

4 / 44
2. DEVICE ACTIVATION
Activation of the Tractive
®
GPS XL device requires the device to be turned on. Keep
the power button on the device pressed for around 3 seconds. Once you hear 2 short
ascending beeps and see a green light, the device has succesfully been turned on.
Holding the button again for 3 seconds will turn off the device. In order to get GPS
reception, ensure that the device is located outside of buildings and under clear sky.
Enter the link below into the address bar of your browser to access the Tractive
®
website, which will guide you through the step by step activation of your Tractive
®
GPS XL device: tractive.com/activate
3. DOWNLOAD TRACTIVE
®
GPS APP
The Tractive
®
GPS app will guide you through the first steps of adding an animal and
assigning a new Tractive
®
GPS XL device to the animal.
Note: After turning on the Tractive
®
GPS XL device for the first time or after a period
of inactivity, it can take a few minutes until the device is ready to use. To speed up
this process, turn on the device and make sure it’s placed under clear sky away from
buildings, trees and electrical towers.
4. ATTACHING TRACTIVE
®
GPS XL TO A PET COLLAR
Clip the Tractive
®
GPS XL device on the harness or the collar of your animal by using
the included clips. The clips are made for different collars: use the one with an S at the
back for collars with a thickness up to 5 mm and the one with an L at the back for collars
with a thickness up to 8 mm.