9. OPERATING ANOMALIES AND TROUBLESHOOTING
Trouble
Possible causes
Solutions
No initial
reset
Peak load function
activated
Tare function activated.
Permanent
deformation of the
sensor following a
handling error;
excessive overload or
compression.
Deactivate the function Peak
load or Tare and display the
"GROSS" value of the force.
The appliance should be
checked by the manufacturer
before you continue using.
The sensor
does not
switch on
Dead batteries.
Electronic fault.
Change batteries.
Contact the after-sales
service.
No display
evolution
or display
inconsistent
Sensor or sensor
electronics
malfunction.
Reinitialise: Switch off, then
switch on the sensor.
In the event of persistent
malfunction, contact the after
sales service.
Linearity or
precision
problem
Sensor or sensor
electronics
malfunction.
Contact the after-sales
service.
www.lemmens-cables.be
[email protected]
