Note :
If a tare is defined, for example at 50% of the device capacity,
therefore giving an indication of "0.0", if the load decreases, it will be
indicated on the screen as a negative value. For example, a decrease of
25 kg will give an indication of "– 25.0".
5.2.2. Peak load function
5.3. ADJUSTMENT
The adjustment frequency of the device depends on the local regulations
and the extent to which the device is used.
The device can be checked and readjusted if necessary.
5.3.1. Adjustment procedure
The buttons are identified as follows:
• ON/OFF: Start-Stop button (item D of §2).
• TARE: Tare function button (item E of §2).
• HOLD/UNITS: Peak load / Units button (item F of §2).
Nbr
DISPLAY
REMARKS
1
daN
kg
Ibs
Net
Gr.
Device ready to operate.
No force on device.
2
daN
kg
Ibs
Net
Gr.
E
Press the HOLD / UNITS (peak load)
button.
The measurement frequency goes to
30 Hertz.
The filtering function is deactivated.
The Tare function is inhibited.
The function is accessible regardless of
the unit.
3
daN
E
kg
Ibs
Net
Gr.
Apply a variable pulling force on the
device.
Release any force on the device.
The value of the maximum force remains
frozen on the screen.
4
daN
kg
Ibs
Net
Gr.
To exit the function: press the HOLD /
UNITS (Peak load) button.
The measurement frequency returns to
3 Hertz.
Return to step 1.
The function is reinitiated (return to step 1)
when the device is switched off.
www.lemmens-cables.be
[email protected]
