TracVan installation is straightforward, and should take you
under 20 minutes to complete. You’ll attach the Crossbars to
the Corner Brackets, then attach this assembly to the Gutter
Rails of your van.
1. Verify that you have received the correct parts using the
attached Assembly Drawing and Packing Checklist.
TRACVAN
INSTALLATION INSTRUCTIONS
SKU# 29054, 29055 & 29056
Tools Required
1) Tape Measure
2) Socket Wrench
3) 9/16” Socket
Recommended
1) Torque Wrench
Special Installation notes:
• All 1998+ Chevy Express / GMC Savanna (G-Series Vans) require the supplied Gutter
Span, which are designed to span the putty filled rain gutter of the Van for maximum
strength. If you use the supplied Gutter Spans, refer to “Roof Installation B” instruc-
tions on page 5 for proper installation.
• All 2000+ Ford Econoline Vans: DO NOT install the rubber strips to the Corner Brackets.
• When installing a TracVan Triple
(SKU# 29056)
to a Chevy Express / GMC Savanna
(SKU# 29056)
(SKU# 29056)
(G-Series Vans) and Ford Vans with curved roofs you’ll need to add the supplied Shims,
to compensate for the gutter’s curve.
Gutter Span
