Clock adjustment:
When the display is in basic position. With the
UP
button we can change between
the 12 and 24 hour displaying. By the
SET
button pressing we enter into the programming. It is
flashing the displaying of the day. With the
UP
button we can select the proper day. By the
SET
button
we can step further on to adjust the hour and minute, with the
UP
button can be changed the value.
The cost adjustment:
When the display is in basic position, keep it pressed the
FUNC
button for 5
seconds. By the SET button you enter into the programming function, what in the right up corner being
SET
display is signalling. With the
UP
button can be the value changed. The local value can be
selected by the
SET
button.
Also the place of the decimal point can be changed. After you have chosen the fee, also the starting
point of the charge it should be selected. Here the day and the time there should be given, too. The
days can be selected according to the following list: MO, TU, WE, TH, FR, SA, SU; MO, TU, WE,
TH, FR; MO, TU, WE, TH, FR, SA; SA, SU. At the end of the adjustment the
SET
signal will
disappear. After pressing the
FUNC
button the 2nd tariff can be programmed, the 1st on the same
way. At the end of the procedures after 10 seconds automatically it steps out from the programming
mode.
Technical data:
Rated voltage: 230V AC 50Hz
Maximum current: 16A
Maximum output : 3600W
The smallest represented current: 0,02A
The smallest represented output: 0,5W
Correctness of the power measuring: ±1,5% and ±2 digit
Maximum of the measured energy: 9999,9kWh
Operating temperature: 0
o
C-40
o
C
Batteries to be used: 3x1,5V LR44
Data keeping with batteries, without supply network: max. 3 months
Using and safety
:
Only by current protection device protected, in 230V supply voltage circuit use it.
Max. with 16A protected in socket outlet use it.
Only for indoor use.
Under loading do not disconnect the device from the socket!
Disconnect the device from the socket for battery change. The battery keeper can be found on the
back cover of the device, the cover for the change can be opened, the batteries into the cover as it is
marked they should be put in, the cover can be put back only in one mode.
When changing the batteries in the memory stored data are lost.
To the battery the guaranty is not relevant!
Distributor:
TRACON Budapest Kft.
Tel.:
(36-27) 540 000
2120 Dunakeszi, Pallag u. 21.
Fax.:
(36-27) 540 005
