Tracmaster Camon SG30, Original Instruction Manual

Page: 7 / 28

CAMON SG30 Stump Grinder
SG30 Stump Grinder
Page 5
4.0 Unpacking and Assembly
4.1 Major Components Diagram
① Top Handlebar
② Lower Handlebar
③ Operator Presence
(OPC) Lever
④ Throttle Lever
⑤ Choke Lever
⑥ Brake Lever
⑦ Engine
⑧ Cutting Disc
⑨ Discharge Area
⑩ Belt Guard
⑪ Wheels
4.2 Unpacking Instructions
The machine is delivered strapped to a pallet and wrapped with plastic sheet.
Unwrap the plastic wrapping. Cut carefully using a knife if required.
Using a knife or pair of cutters, cut the straps holding the machine onto the pallet.
Push the machine forward safely and gently off of
the pallet once the straps have been removed.
The handlebars will have been folded over the
engine into a transport position.
To position the handlebars in their working position,
remove and relocate the bolts at the bottom of the
lower handlebar into the top position on the chassis
(fig. 1).
2
7
8
11
9
5
10
6
3
1
4
Fig. 1