CAMON SG30 Stump Grinder
SG30 Stump Grinder
Page 19
Open the drain plug on the engine
and the filling plug and drain the
oil into a suitable container or
use a suction pump to remove oil
through filler neck.
Ensure the waste oil is disposed
of properly.
Re-fit the drain plug and tighten.
Fill fresh engine oil through the
oil filling opening. Use a funnel
or similar device for ease of
filling.
Replace the oil filler plug and tighten.
7.4.3 Air Filter
Inspection Check:
Remove the air cleaner cover and inspect the filter elements.
Cleaning:
See fig. 19 containing information provided
by Honda.
Cleaning Dual-Filter Element Types
1. Remove the wing nut from the air
cleaner cover, and remove the cover.
2. Remove the wing nut from the air filter,
and remove the filter.
3. Remove the foam filter from the paper
filter.
4. Inspect both air filter elements and
replace them if they are damaged.
Always replace the paper air filter
element at the scheduled interval.
7.4.4 Spark Plug
Clean and replace.
7.5 Cleaning
After cleaning, particularly if a pressure washer has been used, ensure any
lubrication points are re-lubricated.
Clean the engine with a cloth only. Avoid spraying the engine with jets of water as
this may leak into the fuel and ignition systems.
Fig. 19
Fig. 18