Tracer RVIEW S1 WIRELESS, Instruction Manual

Page: 6 / 34

6
Instructions for use
EN
Tracer RVIEW S1
Wireless
SAFETY RULES
1. During the installation, the camera set requires tampering with the vehicle’s electrical system –
therefore it is recommended that you visit a professional car service in order to install it.
2. In case you decide to install it yourself, follow this instruction manual; should you have any questions,
contact the manufacturer or a professional car service.
3. The manufacturer shall not be held responsible for any damages to the product or vehicle resulting
from improper installation of the camera set.
4. The rearview camera set cannot replace the rearview mirror and does not lessen the necessity for the
driver to concentrate. When driving, do not rely solely on the image from the camera – it is only an
additional, supporting view with a limited angle of vision (blind spots).
5. The manufacturer shall not be held responsible for any damages resulting from collision or damages
to the vehicle(s) resulting from maneuvers carried out using solely the image from the camera.
BOX CONTENTS / TECHNICAL SPECIFICATIONS
Registration plate frame with camera (1 pc.)
Dimensions: 546 x 140 x 21 cm
Resolution: 756 x 582 pix
Viewing angle: 120 degrees
Camera inclination adjustment: 30 degrees
Power supply: 12 V / 60 mA
Power cable length / video: 50 cm
Night mode - 4 IR diodes
Folding monitor (1 pc.)
Resolution: 800x480 pix
Screen diagonal: 4.3 inches
Power supply: 12 V / 60 mA
Power cable length / video: 50 cm
Wireless set – TRANSMITTER & RECEIVER 2.4 GHz (1 pc.)
Power supply: 12 V / 60 mA
Frequency: 2.4 GHz
Range: 6 m
SCREEN power supply cables (1 pc.)
Cable length: 100 cm
cable QUICK CONNECTOR / CONNECTOR (2 pcs.)