background image

Battery meter operation

IMPORTANT: The battery meter is operated with the switch. It must be operated AT LEAST 
2 minutes after the load (such as a lamp) has been switched off and when the charger is 
disconnected. The battery will recover slightly and ONLY then will the battery meter give an 
accurate battery state indication.

USB operation

The USB output is operated with the switch. There are 2 outputs, 2.1A and 1A. Do not leave the switch 
operated if the USB in not in use as this will slowly discharge the battery.

Warranty

Your new battery has a 12 month warranty (from the date of purchase) against premature failure due 
to defects in materials and/or workmanship, subject to the following conditions:

The warranty does not cover failure due to use outside of the specification and parameters set out 
in the previous sections.

 The warranty does not cover failure due to damage caused by abuse.*

 The warranty does not cover failure from excessive wear and tear even within the warranty period.

 A till or computer generated proof of purchase must accompany your claim.

 The warranty is limited to the original owner and is not transferable.

  Should any original defect appear, please log your warranty claim with your retailer or 
at 

www.

tracerpower

.com

The warranty is void if:

 The serial number is removed from the product.

 The battery or connection system has been modified in any way.

 The battery has been left in a discharged state.

This warranty is limited to the original purchaser and is in addition to your statutory rights.

*  Charge your battery directly after each use. Leaving your battery in a discharged state will 

seriously and permanently damage its performance. Please note we cannot uphold warranty 
claims in these circumstances.

Supplied with

 Tracer Li-ion battery pack and carry case.

 Tracer mains Fast charger.

 Tracer PL2M plug to bare ends. 1m length (

TR8305

).

 Terminal post connecting eyelets.

Spare and accessories

Please visit 

 www.

tracerpower

.com to see a full list of available 

accessories.

06

Summary of Contents for BP2905









Reviews: