background image

This is the latest in portable battery pack 

technology from Tracer.

Please take a moment to read carefully the following instructions to get the best 
performance from your lithium battery pack.

Features

 Lightweight – approximately ¼ of the weight of equivalent capacity sealed lead acid batteries.

 Strong and robust carry case for transport and protection.

   Flat discharge curve – constant power for longer.

 Battery meter – displays battery charge status. 

 Fitted with terminal posts (rated 20A), CH2F chassis mount charge / discharge socket (rated 20A), 
12V socket (rated 10A), USB sockets x2 (2.1A & 1A). 

 12.6V 10A charger supplied.

 No memory effect – can be recharged after partial discharge.

 Protected against: overcharge, over temperature, over current, deep discharge and short circuit.

Precautions in use

 Do not attempt to dismantle the battery pack in any way.

 Do not short circuit your battery pack – although protected it could overheat.

   Only use the charger supplied with battery pack.

 Do not use as a cranking battery or for starting an engine.

 Your battery pack will need to be charged fully before use.

 If storing your battery pack, store in a charged state. Recharge every 6 months.

 It is recommended to recharge the battery pack within 12 hours if fully discharged.

 Operating temperature (charging): 0°c to 45°c.

   Operating temperature (discharging): -10°c to 60°c.

   Excess heat will degrade the battery pack. Always store your battery pack in a cool dry place.

 Do not leave for long periods in the sun or in a hot vehicle.

 Do not immerse your battery pack in water.

  Do not dispose of in normal household refuse.

Operation

 The CH2F socket can be used for charge or discharge.

 To insert the PL2M connector align the connector’s slots, push forwards and then rotate clockwise 
until a positive click is heard and the quick lock is engaged.

 To remove the PL2M connector rotate the connector anti-clockwise and pull away from the socket. 

Please note – the total output of all current connections must not exceed 20A. 

01

Summary of Contents for BP2905









Reviews: