TR-Electronic HID V5, Installation Manual

Page: 30 / 32

Programming

TR-Electronic GmbH 2014, All Rights Reserved Printed in the Federal Republic of Germany
Page 30 of 32 TR - E - TI - DGB - 0103 - 05 06/21/2016
5.5 SSI
5.5.1 Counts SSI-Bits
The parameter
Number of data bits
defines the number of reserved bits for the
measuring system position.
lower limit 12
upper limit 31
default
24
5.5.2 SSI-Code
Selection Description Default
Binary SSI output code = Binary
Gray SSI output code = Gray X
5.5.3 SSI-Frequency Master-Mode
If the adapter is used as SSI master, with this parameter the SSI transfer rate can be
set.
Selection Description Default
750 kHz SSI transfer rate 750 kHz
400 kHz SSI transfer rate 400 kHz
250 kHz SSI transfer rate 250 kHz X
200 kHz SSI transfer rate 200 kHz
125 kHz SSI transfer rate 125 kHz
5.5.4 SSI-Cycle Master-mode
If the adapter is used as SSI master, with this parameter the SSI cycle time can be
set.
Selection Description Default
300

s SSI cycle time 300

s
400

s SSI cycle time 400

s
500

s SSI cycle time 500

s X
1 ms SSI cycle time 1 ms
2 ms SSI cycle time 2 ms
5 ms SSI cycle time 5 ms
10 ms SSI cycle time 10 ms