Programming
TR-Electronic GmbH 2014, All Rights Reserved
Printed in the Federal Republic of Germany
Page 26 of 32
TR - E - TI - DGB - 0103 - 05
06/21/2016
5 Programming
5.1 Default settings
In case of delivery the following parameters are preset:
●
Protocol-Type:
TRWinProg
●
Output Interface
RS485
●
Baud rate:
9600 Baud
If the PC adapter shall be operated under TRWinProg, no programming of the PC
adapter is necessary.
5.2 Requirements
The PC adapter can be programmed only about the programming software
TRWinProg ex version 5.11 (DLL3.1.6). Therefore, TRWinProg must already be
installed on the PC for programming. If this is not the case, the program and the
program documentation can be downloaded from the internet page:
Download
.
So that the PC adapter is detected by TRWinProg,
no Plug Power Supply Unit
and no measuring system
at the PC adapter must be connected. Only a
connection about the USB-cable to the PC must be established!
