Instructions for mounting / schematic
TR-Electronic GmbH 2011, All Rights Reserved
Printed in the Federal Republic of Germany
Page 38 of 39
TR - ECE - BA - DGB - 0081 - 05
02/14/2018
4.3.2 Type with
ø
25
H7…40H7 and optional parallel key / groove
The torque holder basically can be mounted on both sides.
In case of version
(A)
the minimum thickness of the assembly plate (7.5 mm)
corresponds to the mounting shaft thickness (6.5 mm) plus min. 1 mm safety distance
to the machine. In case of version
(B)
the minimum thickness of the assembly plate
depends not on the mounting shaft of the measuring system.
Mount measuring system with the torque holder by means of two M3 screws at the
assembly plate (machine) and protect it against slipping on the shaft by tighten the
clamping ring with the hexagon key.
Figure 11: Type with torque holder (sheet-metal spring) with
ø
25
H7…40H7
