TQC LD5850, Instruction Manual

Page: 14 / 32

14
4. Point the sensor to the object. Make sure the three LED pointers combine into one point on
the object. This is the correct measuring distance.
5. Press the measurement button to trigger the measurement (b). Start and end of the
measurement are indicated by a brief flash of the positioning LEDs and an acoustic signal.
6. The measurement result (3) is shown on the display. The meter is ready for the next
measurement.
7. If you want to delete the measurement press delete (c6) shortly. If you want to start over
with the statistics (if enabled), press delete (c6) long and all measurements will be deleted.
EN