24
6.6 editing User calibrations
NOTe
factory calibrations cannot be deleted or changed!
Go to measure settings > user calibration>edit.
select the desired user calibration and press OK.
Now you are back in the registered measured value for the calibration. for instance the value of
the example as described in section 6.4.1 will be Offset +20µm.
Use the cursor and the arrow key (6a) to correct the offset. The value consist of 3 digits that has
to be adjusted and confirmed separately. Use function button 6b to confirm each digit. By
changing the first digit you can also change the + - offset. The new offset is automatically stored
when you touch the back button (6c)
NOTe
In the edit menu it is also possible to delete the user calibration. When the sentence
“delete Calibration” is marked black, and the OK button (6b) is pushed the user
calibration will be deleted.
6.7 Deleting User calibrations
NOTe
All measured values and user calibrations can be deleted immediately via the menu
Instrument settings >> factory reset. The PowderTAG returns to the measurement
screen. All User settings will be reset as well. (See also section 4.4)
EN
Summary of Contents for LD5850
Page 4: ...4 EN...
Page 31: ...31 EN...
