Page
11
of
20
4.4 Technical Data
Latency
<1ms
Resolution
1080p60; 1080p50;
1080p30/29.97; 1080p25/24.97; 1080p23.98/24;
1080i60/59.94; 1080i50; 1080psf30; 1080psf25; 720p60; 720p50
Audio
embedded
Frequency band
5,180 - bis 5,825GHz
DFS Frequencies
5,270 up to 5,550GHz and 5,670GHz for EU&US
Modulation
OFDM/QAM
Übertragungsmethode
MIMO (multiple in / multiple out) integrated multi-antenna system
Protection class
IP41 / splash protected
Range
Up to 100m LoS
Without line of sight less range due to dampening impact of different
material
Weight
Less than 250g
Display
Signal strength / Selected Transmitter (Channel)
Size
146mm x 117mm x 28mm
Voltage supply
HR10-7P-4S / D-Tap Adapter cable 10,5 V – 36 V DC
Power consumption
5-6 W
Interface
HD 3G-SDI Video
Übertragungsstandard
WHDI
Certification
CE, FCC
Fastening
2 x 3/8“ Thread, optional Velcro
Storage temperature (tested)
-40-85°C at 10%~90% humidity
Operating temperature (tested)
0-40°C at 10%~90% humidity
4.4.1 Cable connection Transmitter (TX) / Receiver (RX)
Cable connection
1.) Use included / authorized power-supply cord
2.) Use locking Hirose (HR10-7P-4S) circular connector to connect the system with camera / battery
/ power supply:
Pin 1: negative (-)
Pin 2: --
Pin 3: --
Pin 4: positive (+)
3.) The voltage range is between 10.5V – 36V DC
4.) For
Transmitter
(TX) BNC jack
SDI1
is the SDI input which has to be connected to the SDI-
output of the video source.
5.) For Transmitter (TX) BNC jack
SDI2
is the loop through and can be used as output for the
original signals.
6.) For Receiver (RX) BNC Jack SDI1 and SDI2 can be used as output.
Summary of Contents for MODUL NO. ONE
Page 20: ......
