Page 34
13. Clock Function
13.1 Setting the Clock
1. Select the Clock Set-up menu (
→
→
F4:Setup
→
→
F2:Clock
).
2. The display now shows the current date and time. The cursor starts at
the day. For example…
31/12/02 12:00
F1:< F2:>
↑↑↓↓
:Set
Press the
and
keys until the day is correct.
3. Press
to move to the month. Press the
and
keys until the
month is correct.
4. Press
to move to the year. Press the
and
keys until the
year is correct.
5. Press
to move to the hour. Press the
and
keys until the
hour is correct.
6. Press
to move the cursor to the minutes. Press the
and
keys until the minutes are correct.
7. Check that the date and time are correct.
Press
to save the settings.
If any changes are needed, press the
key to move left to the
desired position.
Press
to quit without resetting the clock.
Notes
1. The
WP-80
does not test for a valid day of the month when setting the
clock (eg: attempting to enter 31/02/96 is not corrected).
2. The
WP-80
does test for leap years.
13.2 Displaying or Hiding the Clock
The date and time are normally displayed along with the pH or mV and
Temperature readings. Press
in normal display mode to alternatively
display or hide the clock. When Relative mV is selected, the
key
alternatively displays the clock or absolute mV.