manualshive.com logo in svg

TPS WP-80, Manual, Page: 26 / 46

Share
Download
TPS WP-80 Manual Download Page 26

 

Page 25 

10. Automatic Datalogging 

The 

WP-80

 can automatically log records into the Notepad. First the 

logging period must be programmed, then automatic logging can be 
started and stopped as required. 

1. Select the Program menu (

 

→

→

 F2:Notepad 

→

→

 F4:Prog.

). 

2. The display should now look like this… 

>00< F1:Min F2:Sec 

↑↑↓↓

:Period   F3:Hr 

3. Use the 

 and 

 keys to set the period at which the 

WP-80

 will 

automatically log records. 

4. When the logging period has been correctly set, select whether this 

period is in minutes, seconds or hours. 

Press 

 to save the period as minutes. 

Press 

 to save the period as seconds. 

Press 

 to save the period as hours. 

eg: If the period was set to 

05

, followed by 

, then the 

WP-80

 will 

automatically log a record every 5 seconds. 

5. If the optional RS232 port is fitted, the 

WP-80

 will ask if the records 

are to be logged into the Notepad, or sent directly to the RS232 port. 

Press 

 to log records into the Notepad (maximum of 150 readings). 

Press 

 to send records directly to the RS232 port. 

6. The automatic logging function is now programmed, and can be 

started and stopped as required. 

Continued over the page… 

Summary of Contents for WP-80















































Reviews:

No comments