manualshive.com logo in svg

TPS WP-80, Manual, Page: 30 / 46

Share
Download
TPS WP-80 Manual Download Page 30

 

Page 29 

11.6 Data Format 

Data is returned to the RS232 Port by the 

WP-80 

in the following format. 

A “

•

” shown anywhere in this section denotes one space. 

LLLL

ss

PPPPPPuuu

ss

TTTTTTuuu

ss

dd/mm/yy

ss

hh:mm:ss 

LLLL

 

is the Log Number. Maximum 4 characters, right 
justified. The 

WP-80

 sends a Zero for instant readings 

(section 11.2)

 

PPPPPP

 is pH/mV data. 6 characters, right justified. 

uuu

 

is the pH/mV unit description, which can be any of the 
following… 

pH• 

for pH readout. 

mV• 

for Millivolts readout. 

mVR 

for Relative Millivolts readout. 

TTTTTT

 is Temperature data, 6 characters, right justified. 

uuu

 is the Temperature unit description, which can be either 

of the following… 

oC• 

for real Temperature data. 

oCm 

for manual Temperature 
compensation values. 

dd/mm/yy

 is the date, month and year data. 

hh:mm:ss

 is the hours, minutes and seconds data. 

When requested by a PC with the ?D or ?R commands (section 11.5), the 
data is terminated with a carriage return. 

When the data is sent by the 

WP-80 

using the Print function (section 9.4) 

or the Send function (section 11.2) the data ends with a carriage return 
and a line feed. 

Summary of Contents for WP-80















































Reviews:

No comments