PRINTING DATA (Continued)
Printout Interpretation
Data from combustion
test is printed here.
Smoke Test Result. For
use on oil fired equip-
ment.
(Circle one to indicate
the result of a smoke
test performed using
the optional A788
smoke test pump.)
Date and time of
combustion test.
Fuel type selected
during test.
Customer information
and signed confirmation
of test.
(Fill in this data and
have the customer sign
for confirmation.)
COMBUSTION ANALYSIS (Continued)
5.2 Combustion Displays (continued)
•
Combustion Display 4
• Displays CO air free (-CF-)
•
Combustion Display 5
• Displays Temperature reading of Channel 1 (T1) in degrees
Centigrade (ºC)
• Displays Temperature reading of Channel 2 (T2) in degrees
Centigrade (ºC)
• Displays the Differential Temperature (Diff.) between ch1 and
ch2 in ºC
• 'oPEn' will be displayed if no 'K' type probe is connected to the
thermocouple socket
5.. During a combustion test you can save, print, and send data to a computer.
See section 7 through 11. Allow readings to stabilize before saving or printing the
data.
6. After the test is complete, remove the flue probe from the test location and
allow the analyzer to purge in a fresh air environment. Turn the analyzer off as
outlined in section 4.2.
NOTE: When selecting oil as fuel be sure to use the optional
oil filter (A773) or readings could become erratic.
