17
16
L. PC Communication
To communicate to a PC and view logged data the optional
A665 docking station and software is required.
Please refer to the instructions that come with the A665 for
operating instructions.
M. Maintenance
Battery Replacement
1. Remove the protective rubber boot beginning at the bot-
tom,
2. Using a screwdriver loosen the two screws located at
the bottom of the 665.
3. Pull on the screws to remove the bottom cover/battery
holder.
4. Remove the batteries and observing polarity replace
them with fresh batteries.
5. Re-install the battery holder and tighten the screws.
Cleaning
Use a mild detergent and slightly damp cloth to clean the
surfaces of the 665.
N. Trouble Shooting & Service
Problem
Probable Causes
Does not power up
•
Dead or defective battery
“batt%” flashes in
•
Low battery indicator. Replace
the lower display
batteries
Readings are high
•
Very weak battery that will
not turn on the low battery
indicator on the LCD
OFL reads in the display
•
Indication of over pressure.
Remove pressure source
•
If pressure source is removed
and the 665 still displays “OL”
the sensor is no longer working
and the 665 needs service.
To obtain service for your 665 please return it to:
TPI / Attn: Service
9615 SW Allen Blvd Suite 104
Beaverton, OR 97005
TPI 665 manual.qxd 11/14/2008 10:36 AM Page 16
www.
.com
1.800.561.8187
