15
14
K. Logging Data (continued)
Setting Up Logging Start Time
1. The logging interval and start time should already be set
and the 665 should be displaying “L-St”. If not, follow steps 1
through 7 on page 12 and steps 1 through 6 on page 13
before proceeding.
This mode sets up stop time for automaitc logging. Logging can
also be activated manually (See page 12).
2. Press
and “L-Et” is displayed. Press
3. The lower left display indicates hours, the lower right indi-
cates minutes and the main display indicates seconds.
4. Press
and
to cycle through hours, minutes
and seconds.
5. Press
and
to change the hours, minutes
and seconds.
6. Exit logging interval mode by pressing
7. To exit edit mode and return to normal operation press
The LCD will display “REC” to remind you
automatic logging is activated. “REC” will blink when log-
ging is taking place.
8. Automatic logging can be deactivated. Please see page 15.
K. Logging Data (continued)
Deactivating Automatic Logging
This mode turns off automatic logging.
1. Activate “EDIT” mode by pressing
2. Press
six times until “L-res” is displayed.
3. Press
and “L-rES” and “YES” is displayed.
4. Press
or
to cycle between NO (Cancel)
and YES (Activate).
6. Once YES or NO is set press
7. Exit logging interval mode by pressing
edit mode.
to exit
TPI 665 manual.qxd 11/14/2008 10:36 AM Page 14
www.
.com
1.800.561.8187
