background image

D. MEASUREMENT TECHNIQUES

Push Buttons

1.

TRIGGER: 

Press and hold the trigger button on the 381a. The thermometer will

power up and the laser will be visible (unless in contact “K” mode).   After
releasing the trigger, the thermometer will hold the last reading then automati-
cally turn off after 10 seconds. For extended measurement time simply hold the
trigger on and the termometer will stay in scan mode. 

2.

RECALL LAST READING:

To recall the last reading before the unit powered off,

quickly press and release the trigger.  The last reading will be displayed for an
additional 10 seconds.

3.

IR/K  

The selector switch is located inside the battery compartment in the han-

dle.  Simply swing open the two piece handle and position the slide switch. Set
to IR for non-contact measurements or set to K for contact measurements.
When set to K, a K-type probe must be connected to the K-type connector
located at the bottom right side of the handle. If a probe is not connected the
thermometer will display “open” when the trigger is pulled.

4.

°F/°C:  

The selector switch is located inside the battery compartment in the

handle.  Simply swing open the two piece handle and position the slide switch.

Temperature Measurement (Infrared)

CAUTION:  LASER RADIATION - DO NOT STARE INTO BEAM.  
OUTPUT <1Mw  WAVELENGTH 645 - 660nm. CLASS II LASER PRODUCT.

1.

Set the IR/K selector switch to IR. Turn the thermometer on by holding down
the trigger.

2.

Line up the laser (except 380a) with the target and hold the front of the ther-
mometer nine inches from the target (spot size will be one inch at this dis-
tance).  

3.

Read the temperature on the LCD.

Temperature Measurement (Thermocouple)

1.

Set the IR/K selector switch to K amd connect a K-type thermocouple probe to
the input jack located at the bottom right side of the handle.

2.

Turn the thermometer on by holding down the trigger.

3.

Touch the thermocouple to the item under test.  

4.

Read the temperature on the LCD.

E. ACCESSORIES

Item #

Description

A009A

....................................9 Volt Alkaline Battery

A380

......................................Soft Carrying Pouch for 380/381/382/383

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for 380a

Page 1: ...ack Probes purchased separately Test the TPI Advantage Contact and non contact thermometer Maintain reading on display Laser sighting except 380a Backlit display 9 1 distance to spot ratio 6 1 for 381Fa 0 1 degree resolution 095 emissivity 3 Year Limited Warranty www GlobalTestSupply com Find Quality Products Online at sales GlobalTestSupply com ...

Page 2: ...obe selected C TECHNICAL DATA Distance to Spot Ratio 9 1 6 1 for 381Fa Temperature Range IR Accuracy 23 C and 0 95 emissivity Non contact 380a 4 to 572 F 20 to 300 C 381Fa 31 to 572 F 35 to 300 C 384a 4 to 1832 F 20 to 1000 C Contact All models 148 to 2192 F 100 to 1200 C 380a 384a 5 F 3 C at 32 F 0 C 2 of rdg or 3 5 F 2 C at 32 F 0 C 381Fa 2 F or 1 5 of rdg at 32 to 158 F 0 to 70 C 3 5 F or 2 of ...

Page 3: ...onnected the thermometer will display open when the trigger is pulled 4 F C The selector switch is located inside the battery compartment in the handle Simply swing open the two piece handle and position the slide switch Temperature Measurement Infrared CAUTION LASER RADIATION DO NOT STARE INTO BEAM OUTPUT 1Mw WAVELENGTH 645 660nm CLASS II LASER PRODUCT 1 Set the IR K selector switch to IR Turn th...

Page 4: ...on charges to the purchaser are also covered Not Covered by Warranty Damages to the product which are the result of abuse improper use or maintenance are not covered Any other expense consequential damages incidental damages or incidental expenses including dam ages to property are not covered Transportation expenses to the company are not covered Some states do not allow the exclusion or limitati...

Reviews: