TPG BizPhone Premium T48S IP Phone User Guide
P a g e
|
29
To place call using the headset:
Do one of the following:
-
With the optional headset connected, press to activate the headset mode.
Tap the line key to obtain a dial tone.
Enter the desired number using the keypad or the on-screen keypad.
Press or tap the
Send
soft key.
-
With the optional headset connected, press to activate the headset mode.
Enter the desired number using the keypad.
Press or tap the
Send
soft key.
Placing Calls from Local Directory
To place a call to a contact from the local directory:
1.
Tap
.
The IP Phone enters the local directory directly as there is only one Local Directory enabled in the directory by
default.
2.
Tap the desired contact.
If the contact was added to specified contact group, you can tap the contact group first, and then tap the desired
contact.
-
If only one number for the contact is stored in the local directory, the contact number will be dialled out.
-
If multiple numbers for the contact are stored in the local directory, the touch screen will prompt:
Tap the desired number.
The selected number will then be dialled out.
