65 / ERN C
MenaObsluhy - Notepad
x
[MenaObsluhy]
1= Igor Brezina
2= Ladislav Gogola
3= Peter Pan
File Edit Format View Help
12. Creation and modification of the operators list
Operator’s name is used for the identification when creating winding machine production log. If the
creation of the production log is enabled the code of his own must be assigned to each operator,
which is entered after the winding machine is turned on. The names and codes information is
stored in the file D:\TPCERN\MenaObsluhy.ini.
When modificating this file do as follows:
-
make an empty folder on the flash disc and into this empty folder copy the file
D:\TPCERN\MenaObsluhy.ini (the file already exists on the delivered flash disc)
-
connect flash disc to other computer with a keyboard, open the file MenoObsluhy.ini in the
proper programme (wordpad, notepad, etc.) and make necessary changes:
-
never change header, it has to remain on the first row, in the form [MenaObsluhy]
-
all the following rows have to be in form: numerical code of the operator = name and
surname of the operator, e. g. 127 = John Smith
-
save the changes to the file and connect the flash disc and the mouse to the winding
machine
-
right click over the Status panel, select “Close” and close the application (entering the
Master code is necessary)
-
on the desktop window select the «upgrade_C_D» shortcut and start the programme
-
select START UPGRADE; a dialog box for the file selection is displayed
-
in the folder on the flash disc select the file MenoObsluhy.ini (in the folder there has not to
be present any other file or subfolder) and push OPEN
-
after button OPEN is pushed file is automatically copied to the disc D: and an old file is
replaced by the new one (FlushDriveD is automatically performed too)
-
after copying the START UPGRADE changes into UPGRADE SUCCESFUL
-
close the programme and by the Cstarter shortcut start the standard programme, or turn off
and on the winding machine.
