2. TECHNICAL DATA
Wire diameter (mm):
Pitch range (mm/rev):
Winding width (mm):
Winding speed / torque (rpm/Nm):
Accuracy of spindle stop (rev):
Spindle position pre-set (rev):
Max.speed of wire guide - shift (mm/s)
- winding
Acceleration/deceleration:
Max.coil diameter (mm):
Distance between centres (mm):
Dimensions (mm):
Weight (kg):
Power supply (V/Hz):
Power consumption (kVA):
Noise (dB):
3. DESCRIPTION OF MACHINE
Coil winding machine ERN consists of the following parts:
- controller containing control electronics and programming elements
- drive unit containing servomotor with gears, pitch control unit with stepping motor,
power electronics and control elements
- base plate
- protection shield
- support with spool holders and dereelers (optional accessories)
- tailstock (optional accessories)
- wire guides (optional accessories)
Winding cycle (linear acceleration, max.speed, linear deceleration and stop) is running automaticly
after pressing the START-button. Deceleration is controlled by microprocessor to ensure
accurate stopping and spindle positioning.
rpm
MAX.SPEED
NUMBER OF TURNS
C
LE
AT
O
N
D
E
E
R
I
LI
E
A
A
C
C
LE
R
.
N
R
E
2.1 Climatic conditions
Machine is designed for normal workshop´s conditions with relativ air moisture
70% and temperature in the range +15 up to +30 C.
ERN22
0,02 - 1,7
0,008 - 40
0,1 - 210
12000 / 0,7
6000 / 1,5
3000 / 3
0,01
0,01
100
75
table
180
250
780 x 420
85
230 / 50-60
1
74
ERN32
0,02 - 2,5
0,008 - 40
0,1 - 300
6000 / 1,5
1500 / 6
750 / 12
0,01
0,01
100
75
table
250
340
870 x 460
120
230 / 50-60
1,2
74
ERN32S
0,02 - 3,0
0,008 - 40
0,1 - 300
4000 / 3
1000 / 12
500 / 24
0,01
0,01
100
75
table
250
340
870 x 460
120
3x 400/50-60
1,5
74
ERN42
0,02 - 5,0
0,008 - 40
0,1 - 300
4000 / 3,5
1000 / 15
500 / 30
0,01
0,01
100
75
table
450
330
910 x 530
140
3x 400/50-60
1,5
74
ERN52
0,02 - 5,0
0,008 - 40
0,1 - 450
4000 / 3,5
1000 / 15
500 / 30
0,01
0,01
100
75
table
450
650
1235 x 530
180
3x 400/50-60
1,5
74
2 / ERN C
