TPC ERN 100T, Operating Instructions Manual

Page: 5 / 69

2. TECHNICAL DATA
Pitch range (mm/rev):
Winding width (mm):
Winding speed / torque [rpm/Nm]:
Accuracy of spindle stop [rev]:
Spindle position pre-set [rev]:
Wire guide position pre-set [mm]:
Max.speed of wire guide - shift [mm/s]:
- winding
Acceleration/deceleration:
Max.coil diameter [mm]:
Distance between centres [mm]:
Dimensions (mm):
Weight [kg]:
Power supply [V/Hz]:
Power consumption [kVA]:
Noise [dB]:
3. DESCRIPTION OF MACHINE
Coil winding machine ERN consists of the following parts:
- controller containing control electronics
- industrial PC with 15" touch screen
- drive unit containing servomotor with gears, pitch control unit with servomotor,
power electronics and control elements
- base frame
- moving tailstock (optional tilting)
- universal wire guide (adjustable for round and flat wire)
- support with spool holders and dereelers (optional accessories)
Winding cycle (linear acceleration, max.speed, linear deceleration and stop) is running automatically
after pressing the START-button. Deceleration is controlled by microprocessor to ensure
accurate stopping and spindle positioning.
rpm
MAX.SPEED
NUMBER OF TURNS
DECELERA
TION
LINEAR
ACCELER.
2.1 Climatic conditions
Machine is designed for normal workshop conditions with relative air moisture
70% and temperature in the range of +15 up to +30 C.
2 / ERN T / V 1.3
ERN 100
0,00 0 - 160
400 - 800 - 1200
600 / 75
300 / 150
0,01
0,
01
0,01
100
75
table
600 - 800
- 1000
800 1200 1600 -
-
1800 2300 0 740x - - 250
600 750 900 - -
3 x 400 / 50-60
max. 7
74
ERN 200
0,000 - 160
400-800-1200
150 / 270
75 / 540
0,01
0,01
0,01
100
75
table
600 - 800 - 1000
800 1200 1600
- -
0 2300 78 x1800 - - 2500
700 850 1000 - -
3 x 400 / 50-60
max. 7
74