TPB TECH 75.080.14.242 INSTRUCTIONS MANUAL
10
Residual heat indicator
The cooking plate features a residual heat indicator on each cooking area to show which are
still hot. Avoid touching the cooking area displayed as such.
Although the plate is off, the
H
indicator will remain lit while the cooking area is hot.
The
U
and
H
indicators will light up alternately if you remove the pan before the cooking area
has been turned off. If you place the pan on the cooking area again the power level selected
beforehand will light up.
Programming the cooking plate
This chapter explains how to set a cooking area. The table illustrates the power levels.
Turning the cooking plate on and off
The cooking plate is turned on and off using the main switch.
To turn it on: press the
symbol.
You will hear a beep. The indicator located next to the
symbol and the
indicators on the cooking areas will light up. The cooking plate is
ready for use.
To turn it off: press the
symbol until the indicators go out. All the cooking areas are now
turned off. The residual heat indicator will remain lit with the
H
symbol until the cooking areas
have cooled down sufficiently.
N.B:
■
The cooking plate turns itself off automatically when all the cooking areas have been
turned off for 20 seconds.
■
The settings selected are memorised before the plate is turned off. If the cooking plate is
turned back on during this time new settings need to be selected.
