Customize settings with TPlay
• Info
The accompanying TPlay - CD / USB contains soundtrack to adjust the
speaker properties beyond what is possible with the switches at the rear of the
speaker.
The soundtrack is divided such that all even numbers have a “function”, while
the odd numbers are “empty numbers” that separates the individual functions,
so that you can manage to stop playing before the next function starts.
To enable a function to a value simply play the number that gives the desired
value. Hi-fi system must be set to normal listening level, and must not be
adjusted while the track is playing. Hi-fi system sound setting should be set to
neutral.
If the SoundDeny is “activatet”, the notes could not be heard, but the function
will nevertheless be executed.
The first number (1), is a test tone that can be used to adjust sound level.
All even numbers starting with 2 tones of 6 sec. duration. At the end of the
second tone, the LED on the front start flashing purple, indicating that the
sound level is in order.
Then there will be rapid succession a series of tones that make up the function
itself. If the light at the end of these notes is red for 2 seconds. it meant that
there was an error.
In case of failure, you can try increasing or decreasing the
volume level a bit and try again.
Note: when adjusting the surround system, it may be necessary to play the “4-stereo”
or put the rear speakers as front speakers temporarily, to get sound level enough to get
adjustment to work.
23
