Place the speaker
• Installation of TP TUBE
TP 500, TP 300 is cleared for use in freestanding mode when the original
TP TUBE stand is mounted. For stability reasons, this stand should always be
used when the loudspeaker is to be detached.
TP 160 has not a requirement for installation of a stand.
1-
Unpac TP TUBE speaker.
2-
A piece of soft protective materials, such as. a small
blanket or foam material on a solid table that is large
enough for the speaker to be there.
3-
Lay the speaker on the side of the protective material in such a way
that the bottom of the loudspeaker protrudes beyond the edge of the
table. (See Figure 3)
4-
Keep stand (optional - not supplied with the speaker) up towards the
bottom of the speaker and secure it with the supplied allen screw.
fig. 3
11
fortsættes...
