17
Chapter 3
Customize Your Network
another device on your local network or your network requires a specific IP subnet, you
can change it.
1. Visit
http://tplinkrepeater.net
, and log in with the password you set for the extender.
2. Go to
Settings
>
Network
.
3. Select
Use the following IP address
.
4. Enter a new IP address as needed and leave the
Subnet Mask
as the default settings.
5. Enter the gateway that is in the same subnet as the
IP Address
. The gateway is usually
the LAN IP address of your extender.
6. Leave the primary and secondary DNS addresses as the default settings.
7. Click
SAVE
.
3. 4. Adjust Wi-Fi Coverage
You can set the extender’s Wi-Fi coverage depending on how large you want your Wi-Fi
area to be.
1. Visit
http://tplinkrepeater.net
, and log in with the password you set for the extender.
2. Go to
Settings
>
Advanced Settings
>
Wi-Fi Coverage
.
3. Select
Maximum Coverage
,
Intermediate Coverage
or
Minimum Coverage
to adjust
your Wi-Fi coverage of the extender.
