4
2
A. Configuration for WISP Client (CPE)
After choosing the
AP Client Router
mode on the above page, this page will then
display.
The
Username
and
Password
are provided by your WISP.
Click
Next
a
Choose your
WAN Connection
Type
provided by your WISP.
Here we choose PPPoE as an
example
Enter the
Username
and
Password
given by your WISP
Click
Next
Enter the
SSID
provided
by your WISP
Click
Next
Click
Finish
Click
Finish
to exit the
Quick Setup
wizard and wait until the AP completes
rebooting automatically. The changes
will take effect after rebooting.
The AP supports three operation mode types:
AP Client Router
,
AP Router
and
AP
.
a) If you want to connect to your WISP, please choose
AP Client
Router
mode and proceed to
A
Ǘ
b) If you want to configure a point to point connection, please skip to
B
;
c) If you want to configure a repeater, please skip to
C
.
Note
Note
