2
Login
Note
If the LEDs display abnormally, please check to see if all the cable connectors
(power adapter and Ethernet cable) are well connected to your device.
Solid light
Flashing if the Wireless Radio
function is enabled
Solid light or flashing
Flashing
Turn on all your network devices and then check to see if the LEDs on the AP
display normally as the diagram below describes.
Note
You will need to assign your computer a
Static IP address
within the
same range as the AP’s IP address. See the
Troubleshooting
T3
if you
need assistance.
Open your web browser and
type in
http://192.168.1.254
in the address bar and press
Enter