131
Example
Enable the IGMP Snooping function and modify Router Port Time as 300
seconds, Member Port Time as 200 seconds for VLAN 1-3, and set the Leave
time as 15 seconds for VLAN 1-2:
TL-SL2428(config)# ip igmp snooping vlan-config
1-3
rtime
300
TL-SL2428(config)# ip igmp snooping vlan-config
1-3
mtime
200
TL-SL2428(config)# ip igmp snooping vlan-config
1-2
ltime
15
Add static multicast IP address 225.0.0.1, which corresponds to VLAN 2, and
configure the forward port as port 1-3:
TL-SL2428(config)# ip igmp snooping vlan-config
2
static
225.0.0.1
interface fastEthernet
1/0/1-3
ip igmp snooping multi-vlan-config
Description
The
ip igmp snooping multi-vlan-config
command is used to create Multicast
VLAN. To delete the corresponding Multicast VLAN, please use
no ip igmp
snooping multi-vlan-config
command.
Syntax
ip igmp snooping multi-vlan-config
[
vlan-id
] [
rtime
router-time
|
mtime
member-time
|
ltime
leave-time
|
rport interface
{
fastEthernet
port
|
gigabitEthernet
port
}
]
no ip igmp snooping multi-vlan-config
Parameter
vid
—— The ID of the VLAN desired to modify configuration, ranging from 2 to
4094.
router-time
—— Router Port Time. Within this time, if the switch does not
receive IGMP query message from the router port, it will consider this port is not
a router port any more. Router Port Time ranges from 60 to 600 in seconds. By
default, it is 300.
member-time
—— Member Port Time. Within this time, if the switch does not
receive IGMP report message from the member port, it will consider this port is
not a member port any more. Member Port Time ranges from 60 to 600 in
seconds. By default, it is 260.
