130
ip igmp snooping vlan-config
Description
The
ip igmp snooping vlan-config
command is used to enable VLAN IGMP
Snooping function or to modify IGMP Snooping parameters, and to create static
multicast IP entry. To disable the VLAN IGMP Snooping function, please use
no
ip igmp snooping vlan-config
command.
Syntax
ip igmp snooping vlan-config
vlan-id-list
[
rtime
router-time
|
mtime
member-time
|
ltime
leave-time
|
rport interface
{
fastEthernet
port
|
gigabitEthernet
port
}
]
ip igmp snooping vlan-config
vlan-id
static
ip
interface
gigabitEthernet
port
no ip igmp snooping vlan-config
vlan-id-list
no ip igmp snooping vlan-config
vlan-id
static
ip
Parameter
vlan-id-list
——
The ID list of the VLAN desired to modify configuration, ranging
from 2 to 4094, in the format of 1-3, 5.
router-time
——
Router Port Time. Within this time, if the switch does not
receive IGMP query message from the router port, it will consider this port is not
a router port any more. Router Port Time ranges from 60 to 600 in seconds. By
default, it is 300.
member-time
——
Member Port Time. Within this time, if the switch does not
receive IGMP report message from the member port, it will consider this port is
not a member port any more. Member Port Time ranges from 60 to 600 in
seconds. By default, it is 260.
leave-time
——
Leave Time, which is the interval between the switch receiving
a leave message from a host and the switch removing the host from the
multicast groups. Leave Time ranges from 1 to 30 in seconds. By default, it is 1.
port
——
The Ethernet port number
.
vlan-id
——
The VLAN ID of the multicast IP, ranging from 1 to 4094.
ip
——
The static multicast IP address.
port-list
——
The list of Ethernet ports.
Command Mode
Global Configuration Mode
