background image

2

Unmanaged PoE+ Switch

Introduction

LED

Indication

Link/Act 

Port 1–16
On

: Running at 10/100 Mbps but no activity.

Flashing

: Running at 10/100 Mbps and is transmitting or receiving data.

Off

: No device is linked to the corresponding port.

Port 17–18/18F (for TL-SL1218P)
Port 17–18/17F–18F (for TL-SL1218MP)
Green On

: Running at 1000 Mbps but no activity.

Green Flashing

: Running at 1000 Mbps and is transmitting or receiving data.

Yellow On

: Running at 10/100 Mbps but no activity.

Yellow Flashing

: Running at 10/100 Mbps and is transmitting or receiving data.

Off

: No device is linked to the corresponding port.

PoE Status

On

: The port is connecting to a PD and supplying power for it.

Flashing

: The PoE power circuit may be in short or the power current may be overloaded.

Off

: No PD is connected to the corresponding port, or no power is supplied according to 

the power limits of the port.

PoE Max

For TL-SL1218P
On: 

Total power supply ≥ 143 W.

Flashing: 

Total power supply ≥ 143 W and lasts for more than 2 minutes.

Off: 

Total power supply ≤ 143 W.

For TL-SL1218MP
On: 

Total power supply ≥ 243 W.

Flashing: 

Total power supply ≥ 243 W and lasts for more than 2 minutes.

Off: 

Total power supply ≤ 243 W.

Switches

Switch

Indication

Extend Mode

Extend Mode switch 

1–8

 and 

9–16

 can control the rate and power supply distance of 

corresponding ports.

Off

: The corresponding ports (1–8/9–16) run at 10/100 Mbps and support PoE power 

supply up to 100 m away.

On

: The corresponding ports (1–8/9–16) run at 10 Mbps and support PoE power supply up 

to 250 m away.

Priority Mode

(1–8)

Off: 

All the ports transmit data with the same priority.

On: 

Port 1–8 transmit data with a higher priority than Port 9–18. When congestion occurs, 

packets which are transmitted by the ports with a higher priority occupy the whole 

bandwidth.

Isolation 

(1–16)

Off

: Port 1–16 can transmit data with every port.

On

: Port 1–16 cannot transmit data with each other. They can transmit data only with port 

17–18.

Summary of Contents for TL-SL1218MP





















Reviews: