TP-Link TL-R470T User Manual Download Page 62

Page: 62 / 118

-58-

Interface Bandwidth

Interface:

Displays the current enabled WAN port(s). The Total bandwidth is equal to

the sum of bandwidth of the enabled WAN ports.

Upstream

Bandwidth:

Displays the bandwidth of each WAN port for transmitting data. The

Upstream Bandwidth of WAN port can be configured on

WAN

page.

Downstream

Bandwidth:

Displays the bandwidth of each WAN port for receiving data. The

Downstream Bandwidth of WAN port can be configured on

WAN

page.

Note:

●

The Upstream/Downstream Bandwidth of WAN port you set must not be more than the bandwidth

provided by ISP. Otherwise the Traffic Control will be invalid.

●

If there are data flowing into the Router from interface A and out from interface B while the

downstream bandwidth of A is different from the upstream bandwidth of B, then the smaller one

should be considered as the effective bandwidth, and vise versa.

●

Click the <View IP Traffic Statistics> button to jump to IP Traffic Statistics page.

4.5.2.2 Bandwidth

Control

On this page, you can configure the Bandwidth Control function.

Choose the menu

Advanced

→

Traffic Control

→

Bandwidth Control

to load the following page.

Figure 4-28 Bandwidth Control

The following items are displayed on this screen:

Summary of Contents for TL-R470T























































































































Search results

Summary of Contents for TL-R470T

Reviews:

Related manuals for TL-R470T

Brands by name

Popular brands

TP-Link TL-R470T, User Manual

Search results

Summary of Contents for TL-R470T

Reviews:

Related manuals for TL-R470T

Brands by name

Popular brands