TL-R4000
Enterprise Broadband Router User Guide
25
Click the
Next
button to go to the next page and Click the
Previous
button to return the
previous page.
)
Note:
If you set the virtual server of the service port as 80, you must set the web management
port on
Security
–>
Remote Management
page to be any value except 80 such as
8080. Or else there will be a conflict to disable the virtual server.
4.6.2 Port Triggering
Some applications require multiple connections, like Internet games, video
conferencing, Internet calling and so on. These applications cannot work with a pure
NAT router. Port Triggering is used for some of these applications that can work with an
NAT router. You can set up Port Triggering on this page shown in Figure 4-22:
Figure 4-22 Port Triggering
Once configured, operation is as follows:
1. A local host makes an outgoing connection using a destination port number defined
in the Trigger Port field.
2. The router records this connection, opens the incoming port or ports associated
with this entry in the Port Triggering table, and associates them with the local host.
3. When necessary the external host will be able to connect to the local host using
one of the ports defined in the
Incoming Ports
field.
¾
Trigger Port
-
The port for outgoing traffic. An outgoing connection using this port
will "Trigger" this rule.
¾
Trigger Protocol
-
The protocol used for Trigger Ports, either
TCP
,
UDP
, or
All
(all
protocols supported by the router).
¾
Incoming Ports
-
The port or port range used by the remote system when it
responds to the outgoing request. A response using one of these ports will be
forwarded to the PC that triggered this rule. You can input at most 5 groups of ports
(or port section). Every group of ports must be apart with ",". For example,
2000-2038, 2050-2051, 2085, 3010-3030.
¾
Incoming Protocol
-
The protocol used for Incoming Ports Range, either TCP or
