Error! AutoText entry not defined.
Error! AutoText entry not defined.
User Guide
24
Figure 4-7
Interface Name:
Displays the name of the LAN interface for the device.
IP Address:
The Router’s local IP Address. You can access to the Web-based Utility via
the IP Address, the default value is 192.168.1.1. You can change the IP address if
needed. The LAN IP address is private to your internal network and cannot be seen on
the Internet.
Subnet Mask:
The subnet mask of the ADSL Router’s LAN interface. The default value
is 255.255.255.0.
Secondary IP:
If you enable the “Secondary IP”, you should configure another IP address
and subnet mask for the LAN interface.
IGMP Snooping
: You can enable or disable the IGMP Snooping function according to your
needs.
MAC Address Control:
The router supports the MAC address control on Ethernet port.
Select the LAN interface on which you want to run MAC Address Control. Click the
Apply
Changes
button to make the configuration take effect. For example, if you enable the MAC
address control on “LAN1”, then the traffic from interface “LAN1” will be flowed only when its
MAC address matches the
Current Allowed MAC Address Table
, otherwise the traffic will
be dropped by the router.
