Error! AutoText entry not defined.
Error! AutoText entry not defined.
User Guide
22
Undo:
Click this button to abandon your operation.
Refresh:
Click this button to refresh the ATM VC table.
Note:
After configuration, you need to click the
Save
button on the left panel to make your configuration
take effect.
4.2.1.2 ATM
Choose “
Setup→WAN→ATM
” menu, you can configure the parameters for the ATM of your
ADSL Router in the next screen (shown in Figure 4-4). Here you may change the setting for QoS,
PCR, CDVT, SCR and MBS.
Figure 4-5
QoS:
Select the Quality of Service types for the Virtual Circuit, including UBR (Unspecified Bit
Rate), CBR (Constant Bit Rate), and nrt-VBR (Variable Bit Rate) and rt-VBR. Please note that
the selection of QoS type will lead to the availability of the following parameters, including
PCR (Peak Cell Rate), CDVT (Cell Delay Variation Tolerance), SCR (Sustained Cell Rate)
and MBS (Maximum Burst Size). Please configure them according to your needs.
Click
Apply Changes
to save your configuration.
Note:
After saving your configuration, you need to click the
Save
button on the left panel to make your
configuration take effect.
4.2.1.3 ADSL
Choose “
Setup→WAN→ADSL
” menu, you can configure some advanced parameters for your
ADSL Router in the next screen (shown in Figure 4-4).
