TP-Link TD-W9980B, User Manual

Page: 88 / 123

TD-W9980B
N600 Wireless Dual Band Gigabit VDSL2 Modem Router (Annex B) User Guide
To add a new entry, follow the instructions below.
1. Click the Add New button in Figure 4-69, and you will see the screen as shown in Figure
4-70.
Figure 4-70
2. Enter the following data:

Destination IPv6 Address: The Destination IPv6 Address is the address of the network or
host that you want to assign to a static route.

Prefix Length: The prefix length of the destination IPv6 address.

Gateway: Here you should type the IPv6 Gateway address correctly, and the option for
Interface will adopt the default IPv6 Gateway address for the IPv6 Static Route.

Interface: Select the Interface name from the drop-down list, or else, the default Interface will
be adopted for the IPv6 Static Route.

Status: Select Enabled or Disabled from the drop-down list .
3. Click Save to save your settings.
To modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click Edit as desired on the Edit column.
Click the Enable/ Disabled Selected button to make selected entries enabled/ disabled.
Click the Delete Selected button to delete selected entries.
4.12.4 RIP Settings
Choose “ Route Settings ”

“ RIP Settings ”, you can see the RIP (Routing Information Protocol)
screen which allows you to configure the RIP.
78