TD-W8962ND
300Mbps Wireless N ADSL2+ Modem Router User Guide
64
Figure 4-56
¾
MAC Address:
The MAC address of the controlled computer in the LAN.
¾
IP Address:
The assigned IP address of the controlled computer in the LAN.
¾
Bound:
Check this option to enable ARP binding for a specific device.
¾
Edit:
To modify or delete an existing entry.
When you want to add or modify an IP & MAC Binding entry, you can click the
Add New
button or
Edit
button, and then you will go to the next page. This page is used for adding or modifying an IP
& MAC Binding entry (shown in
Figure 4-57
).
Figure 4-57
To add IP & MAC Binding entries, follow the steps below.
1. Click
the
Add New
button as shown in Figure 4-56.
2. Enter the MAC Address and IP Address.
3. Select the Bind checkbox.
4. Click
the
Save
button to save it.
To modify or delete an existing entry, follow the steps below.
1. Find the desired entry in the table.
2. Click
Edit
as desired on the
Edit
column.
Click the
Enable/ Disable Selected
button to make selected entries enabled or disabled.
Click the
Delete Selected
button to delete selected entries.
4.13.2 ARP List
To manage the computer, you could observe the computers in the LAN by checking the
relationship of MAC address and IP address on the ARP list, and you could also configure the
