TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-49
¾
Rule Status
: Select the status of the rule from the drop-down list to enable or disable the rule.
¾
IP Range
: Enter a single IP address or a range of IP addresses.
¾
Port Range
: Enter a single port or a range of ports.
¾
Protocol
: Select a protocol type from the drop-down list. TCP, UDP and ALL are available
here.
¾
Precedence
: Select precedence form the drop-down list. There are five options: Highest,
High, Medium, Low and Lowest. The default precedence of the rule is Medium.
¾
Egress Rate
: Enter the min and max upload speed through the WAN port.
¾
Ingress Rate
: Enter the min and max download speed through the WAN port.
After completing the above configuration, click the
Save/Apply
button to make it take effect and
then you will see the following list as shown in Figure 4-50. If you want to modify the rule, click the
Edit
button. If you want to delete the rule, check the
Remove
box first and then click the
Remove
button.
Figure 4-50
)
Note:
The precedence, max egress/ingress rate and min egress/ingress rate work on allocation of
surplus upload/download bandwidth. For rules with different precedence, the surplus bandwidth is
firstly allocated to the rule with the highest precedence according to its max egress/ingress rate. If
53